Sequentix Cirklon Sequencing Roland TB303 with Devil Fish Mod

 

In this video, Meta Function demonstrate sequencing a Roland TB303 with the Devil Fish mod via the Sequentix Cirklon.

The Cirklon is arguably the most intuitive and sturdy hardware sequencer ever made. It features five ports of MIDI I/O, four virtual USB ports and via the CVIO beak out box (BOB), sixteen CV and eight gate outputs. It has an incredibly tight clock and works great as the center of any electronic music based studio.

In this video the Fish receives note pitch and gate over CV/gate via the BOB. CV out 3 is connected to Accent in the Fish, with CV out 4 connect to Slide in. Inside the P3 pattern driving the Fish, Aux A is routed to CC 1 and Aux B is routed to CC 2, which in turn are routed within the Cirklon’s CVIO Config menu to drive CV out 3 and 4 respectively. Whenever Aux A/B is over a value of 64, the measure features an accent/slide. A one bar pattern is created on the fly and slides and accents are added.  Pattern direction modes are manipulated then drums from an Elektron Analog Rhytm are edited via a CK track. The one bar P3 Fish pattern is doubled and edited and transpose and force to scales modes are manipulated. Note measures are ganged/unganged and note lengths are tweaked. Finally the timebase is adjusted.

Audio recorded via Calrec S2 console and SSL convertors. All dry, no FX, EQ or compression. The only post production performed was normalization.

Watch at 1080p with good quality audio monitoring for the best experience.

Background

Grab the Wave Junction for £19.95 exclusively from Sonicstate!

Get It! Via Sonicstate